How to mount your Display frame

This guide covers how to attach your Display frame to a wall and assumes you have already inserted your card.

Want to know how to insert a card and assemble Display?

- Wait 7 days after painting before use

- DO NOT apply strips to paper or soft surfaces

- DO NOT hang over beds or on wallpaper

- Use indoors 10˚ – 40˚C (50˚ – 105˚F)

Please note: Failure to follow instructions and guidance carefully may cause damage to walls.

Display TCG encourages you to follow all preperation, application, and guidance provided on the 3M Website.

All Display trading card frames include 2 pairs of renter friendly 3M Command Strips.

Wall preperation

Please ensure the intended surface is flat, free of dirt, dust, or grease, and has not been painted within the last 7 days.

To clean the surface, wipe with rubbing alcohol. Do not use household cleaners or water.

Seperate each strip and click each pair together.

Remove the liner from one side of the strip and place on each side of the frame to ensure the weight is distributed evenly.

Remove the remaining liners from the Command Strips and press firmly against the wall or chosen surface.

Hold for 30 seconds.

To ensure adhesive strips hold, temporarily remove the frame from the wall with a rolling motion in the direction of the strips.

(If strips horizontal roll, away from tabs to the left or right. If strips are vertical, roll from the bottom > up)

Press strips against the wall for a further 30 seconds.
Wait 1 hour for adhesive to strengthen before reattaching weight.
Remount your frame by aligning the strips and pressing Display against the wall.

Continue to build your display in any way you wish.

Grow your trading card Display.